Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 744 (DOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Armrest Mounting Screw | 2 N.m | 18 lb in |
| Check Strap Bolt | 24 N.m | 18 lb ft |
| Check Strap Nuts | 24 N.m | 18 lb ft |
| Clevis Bolt | 24 N.m | 18 lb ft |
| Door Hinge Bolt | 24 N.m | 18 lb ft |
| Door Lock and Actuator Assembly Mounting Bolt | 9 N.m | 80 lb in |
| Door Striker Bolt | 24 N.m | 18 lb ft |
| Inside Door Handle Mounting Bolt | 9 N.m | 80 lb in |
| Mirror Module Retaining Nut | 0.6 N.m | 5 lb in |
| Mirror Module Retaining Screw | 0.6 N.m | 5 lb in |
| Outside Door Handle Mounting Bolt | 9 N.m | 80 lb in |
| Outside Rearview Mirror Retaining Nut | 9 N.m | 80 lb in |
| Side Access Door Inside Handle Nut | 9 N.m | 80 lb in |
| Side Access Door Latch Bolt | 9 N.m | 80 lb ft |
| Side Access Door Latch Control | 9 N.m | 80 lb in |
| Side Access Door Lower Striker Bolt | 24 N.m | 18 lb ft |
| Side Access Door Upper Striker Bolt | 24 N.m | 18 lb ft |
| Side Door Inside Handle Nut | 9 N.m | 80 lb in |
| Window Retaining Bolt | 2 N.m | 18 lb in |
| Window Run Channel Bolt | 9 N.m | 80 lb in |
| Window Sash Channel Bolt | 6 N.m | 53 lb in |
| Window to Regulator Bolt | 9 N.m | 80 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.