Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Scan Tool Output Controls
2004 Oldsmobile Bravada RWDSECTION Scan Tool Output Controls
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Door Lock Test | Lock All Doors | The BCM actuates the door lock relay when you select ON. All doors should lock. |
| Door Lock Test | Passenger Door Unlock | The BCM acuates the door unlock relay and the driver door unlock relay when you select ON. All doors should unlock. |
Memory Mirror Module
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Left Mirror Test | Mirror Up/Down | The memory mirror module will command the left mirror up and down |
| Left Mirror Test | Mirror Left/Right | The memory mirror module will command the left mirror left and right |
| Right Mirror Test | Mirror Up/Down | The memory mirror module will command the right mirror up and down |
| Right Mirror Test | Mirror Left/Right | The memory mirror module will command the right mirror left and right |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.