Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 706 (POWER SEAT SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA LIST
2004 Oldsmobile Bravada RWD
Scan Tool Data List
2004 Oldsmobile Bravada RWDSECTION Scan Tool Data List
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Memory Seat Module (MSM) Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON, with the Engine OFF | |||
| Battery Voltage | Inputs/Outputs | Volts | Varies |
| Recline Switch | Inputs/Outputs | Forward/Back/Inactive | Inactive |
| Recline Motor | Inputs/Outputs | Forward/Back/Inactive | Inactive |
| Horizontal Position Switch | Inputs/Outputs | Forward/Back/Inactive | Inactive |
| Horizontal Motor | Inputs/Outputs | Forward/Back/Inactive | Inactive |
| Rear Vertical Position Switch | Inputs/Outputs | Up/Down/Inactive | Inactive |
| Rear Vertical Motor | Inputs/Outputs | Up/Down/Inactive | Inactive |
| Front Vertical Position Switch | Inputs/Outputs | Up/Down/Inactive | Inactive |
| Front Vertical Motor | Inputs/Outputs | Up/Down/Inactive | Inactive |
| Horizontal Position | Sensor Data | Pulses | Varies |
| Front Vertical Position | Sensor Data | Pulses | Varies |
| Rear Vertical Position | Sensor Data | Pulses | Varies |
| Recline Position | Sensor Data | Counts | Varies |
| Memory 1 Recline Value | Memory Data | Counts | Varies |
| Memory 2 Recline Value | Memory Data | Counts | Varies |
| Memory 1 Horizontal Value | Memory Data | Pulses | Varies |
| Memory 2 Horizontal Value | Memory Data | Pulses | Varies |
| Memory 1 Rear Vertical Value | Memory Data | Pulses | Varies |
| Memory 2 Rear Vertical Value | Memory Data | Pulses | Varies |
| Memory 1 Front Vertical Value | Memory Data | Pulses | Varies |
| Memory 2 Front Vertical Value | Memory Data | Pulses | Varies |
| Julian Date of Build | Module Information 1 | Numeric | Varies |
| 8 Digit GM Part Number | Module Information 1 | Numeric | Varies |
| Year Module Built | Module Information 1 | Numeric | Varies |
| Manufacture Enable Counter | Module Information 2 | 0-255 | 0 |
| Software Revision Number | Module Information 2 | Two Letters | Varies |
| Software Part Number | Module Information 2 | Numeric | Varies |
Memory Mirror Module (MMM) Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON, with the Engine OFF | |||
| Memory Recall Switch | Inputs | Memory 1/Memory 2/Exit/Idle | Idle |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.