Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 666 (BUMPER SYSTEM)SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Section 666 (Bumper System): Specifications
2004 Oldsmobile Bravada RWDSECTION Specifications
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Bumper Fascia to the Fender Nuts | 4 N.m | 35 lb in |
| Front Bumper Fascia Grille Bolt | 4 N.m | 35 lb in |
| Front Bumper Bracket to the Rail Bolts | 50 N.m | 37 lb ft |
| Front Bumper Energy Absorber Screws | 4 N.m | 35 lb in |
| Front Bumper Impact Bar to Bracket Bolts | 25 N.m | 18 lb ft |
| Rear Bumper Fascia to the Body Bolts | 4 N.m | 35 lb in |
| Rear Bumper Fascia Extension Bolts | 2 N.m | 18 lb in |
| Rear Bumper Impact Bar to the Body Bolts | 25 N.m | 18 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.