Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 656 (ENGINE MECHANICAL - 3.5L (UNIT REPAIR))REPAIR INSTRUCTIONSINTAKE MANIFOLD INSTALLATION

2004 Oldsmobile Bravada RWD

Intake Manifold Installation

2004 Oldsmobile Bravada RWDSECTION Intake Manifold Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

Install the intake manifold.

Fig 1: Installing Intake Manifold
Courtesy of GENERAL MOTORS CORP.
Connect the throttle body heater hose to the water crossover feed tube (1).
Install the hose clamp.

Fig 2: Connecting Throttle Body Heater Hose To Water Crossover Feed Tube
Courtesy of GENERAL MOTORS CORP.
Loosely install the intake manifold bolts.

Fig 3: Installing Intake Manifold Bolts
Courtesy of GENERAL MOTORS CORP.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.