Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Front Caster Adjustment
2004 Oldsmobile Bravada RWDSECTION Front Caster Adjustment
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
Use the following procedure in order to prepare the top strut mounting holes:
- Remove the top 3 fasteners from the strut tower.
- Lift the front of the vehicle by the body in order to separate the strut from the inner wheelhouse.
- Pop out the 2 guide pins.
- Hand file the excess metal in order to make slotted holes.
- Paint the exposed metal using rust preventative paint or primer.
- Lower the front of the vehicle.
- Install the strut attaching fasteners.
Do not tighten the fasteners at this time.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.