SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 644 (ANTI-LOCK BRAKE SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada RWD

Fastener Tightening Specifications

2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
BPMV Brake Pipes 15 N.m 11 lb ft
BPMV to Frame Mounting Bolts 9 N.m 80 lb in
BPMV to Bracket Mounting Nuts 10 N.m 89 lb in
Brake Pressure Modulator Valve (BPMV) Bracket Mounting Bolts 12 N.m 106 lb in
Electronic Brake Control Module (EBCM) to BPMV Mounting Screws 3.2 N.m 28 lb in
Lateral Accelerometer Mounting Screws 2.4 N.m 21 lb in
Traction Control Mounting Screw 2 N.m 18 lb in
Yaw Rate Sensor Mounting Nuts 6 N.m 53 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.