Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 602 (ENGINE COOLING SYSTEM)GENERAL DESCRIPTIONTESTING THE PRESSURE CAP
2004 Oldsmobile Bravada RWD
Testing The Pressure Cap
2004 Oldsmobile Bravada RWDSECTION Testing The Pressure Cap
WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
TOOLS REQUIRED:
- J42401 Surge Tank Cap Tester
CAUTION:
DO NOT REMOVE PRESSURE CAP FROM A HOT SYSTEM. ALLOW THE SYSTEM TO COOL, THEN SLOWLY REMOVE PRESSURE CAP.
- Remove the pressure cap from the coolant surge tank.
- Make sure that all parts of the pressure cap, tester, and adapter are clean.
- Wet the rubber gasket of the pressure cap with water and install Surge Tank Cap Tester J42401-1 to cap.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.