Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 483 (COMMON SPECS & PROCEDURES)CHARGING SYSTEMGENERATORGENERATOR TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Generator Torque Specifications
2004 Oldsmobile Bravada RWDSECTION Generator Torque Specifications
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
GENERATOR TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Battery Ground (Negative) Cable Nut-To-Transaxle Stud | 18 (25) |
| Battery Hold-Down Retainer Bolt | 18 (25) |
| Battery Terminal Bolt | 12 (16) |
| Generator Bolt | 37 (50) |
| Generator Bracket Bolt | 37 (50) |
| INCH Lbs. (N.m) | |
| Battery Ground (Negative) Cable-To-Inner Fender Bolt | 44 (5) |
| Battery Positive Cable-To-Underhood Electrical Center Nut | 89 (10) |
| Battery Tray Bolt | 89 (10) |
| Generator B+ Terminal Nut | 115 (13) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.