Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 260 (AUTOMATIC TRANSAXLE REMOVAL & INSTALLATION)TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Torque Specifications
2004 Oldsmobile Bravada RWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2003 Chevrolet Malibu and 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Engine Brace Bolts | 53 (72) | |
| Flywheel-To-Torque Converter | 46 (62) | |
| Starter Bolts | 37 (50) | |
| Torque Converter-To-Transaxle Bolt | 46 (62) | |
| Transaxle Mount-To-Body | 66 (90) | |
| Transaxle-To-Engine Bolt | 66 (90) | |
| Wheel Lug Nut | 100 (140) | |
| INCH Lbs. (N.m) | ||
| Battery | ||
| Cable-To-Starter Nut | 133 (15) | |
| Negative Cable-To-Battery | 142 (16) | |
| Cooler Pipes | 71 (8) | |
| Fender Liner | 18 (2) | |
| Starter Wire-To-Solenoid | 97 (11) | |
| Wiring Harness Ground | 71 (8) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.