Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 210 (AUTOMATIC TRANSMISSION SERVICING)TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Torque Specifications
2004 Oldsmobile Bravada RWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Case Cover-To-Driven Sprocket Support Bolt | 18 (25) |
| Case-To-Drive Sprocket Support Bolt | 18 (25) |
| Case Extension-To-Case Bolt | 26 (36) |
| Case Side Cover-To-Case Bolt | 18 (25) |
| Case Side Cover-To-Case Stud | 18 (25) |
| Case Side Cover-To-Case Bolt (TORX(R)) | 18 (25) |
| Engine Wire Ground Nut | 18 (25) |
| Flywheel-To-Torque Converter Bolt | 46 (63) |
| Manual 2-1 Band Servo Cover Bolt | 17 (24) |
| Manual Shaft/Detent Nut | 23 (32) |
| Oil Cooler Fittings | 28 (38) |
| Oil Cooler Quick Connector | 28 (38) |
| Oil Cooler Quick Connector (With Check Ball) | 28 (38) |
| Park Neutral Position Switch Bolt | 18 (25) |
| Pump Body-To-Case Bolt | 12 (16) |
| TFP Switch-To-Case Bolt | 12 (16) |
| Transaxle Brace-To-Engine Bolt | 46 (63) |
| Transaxle Brace-To-Transaxle Bolt | 32 (43) |
| Transaxle Mount Bracket Bolt | 70 (95) |
| Transaxle Mount Lower Nut | 35 (47) |
| Transaxle Mount Upper Nut | 35 (47) |
| Transaxle Range Selector Nut | 18 (25) |
| Transaxle Shift Cable Bracket Bolt | 22 (30) |
| Transaxle-To-Engine Bolt/Stud | 55 (75) |
| Transaxle Wiring Ground Nut | 18 (25) |
| Valve Body-To-Driven Sprocket Support Bolt | 18 (25) |
| 2-1 Servo-To-Case Bolt | 18 (25) |
| INCH Lbs. (N.m) | |
| Accumulator Bolt | 97 (11) |
| Accumulator Cover-To-Case Bolt | 106 (12) |
| Case Cover-To-Case Bolt (M6x1.0x30) | 106 (12) |
| Case Cover-To-Case Bolt (M6x1.0x40) | 106 (12) |
| Case Cover-To-Driven Sprocket Support Bolt (TORX(R)) | 106 (12) |
| Detent Spring-To-Case Cover Bolt | 106 (12) |
| Fluid Filler Tube Bracket Bolt | 115 (13) |
| Forward Band Servo Cover-To-Case Bolt | 106 (12) |
| Oil Cooler Hose/Pipes Retaining Bracket Bolt | 27 (4) |
| Oil Pan-To-Case Bolt | 124 (14) |
| Oil Pressure Test Hole Plug | 106 (12) |
| Oil Pressure Test Plug | 97 (11) |
| Pump Cover-To-Case Cover Bolt | 106 (12) |
| Pump Cover-To-Pump Body Bolt | 106 (12) |
| Speed Sensor-To-Case Bolt | 106 (12) |
| TFP Switch-To-Case Cover Bolt | 106 (12) |
| TFP Switch-To-Valve Body Bolt | 70 (8) |
| Torque Converter Cover Bolt | 89 (10) |
| Valve Body-To-Case Cover Bolt (M6x1.0x30) | 106 (12) |
| Valve Body-To-Case Cover Bolt (M6x1.0x55) | 106 (12) |
| Valve Body-To-Case Bolt (M6x1.0x65) | 106 (12) |
| Valve Body-To-Case Bolt (M6x1.0x85) | 106 (12) |
| Valve Body-To-Case Cover Bolt (TORX(R)) | 106 (12) |
| Vehicle Speed Sensor Bolt | 97 (11) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.