SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 20 (THEFT DETERRENT SYSTEM)REMOVAL & INSTALLATIONPASSLOCK(TM) MODULEINSTALLATION
2004 Oldsmobile Bravada RWD

PASSLOCK(tm) MODULE: Installation

2004 Oldsmobile Bravada RWDSECTION Installation
WARNING: This page is about a different car, the 2002 GMC Savana, 2002 Chevrolet Chevy Express, 2001 GMC Savana, and 2001 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.

Install the Passlock(tm) control module (2) to the I/P. Connect the electrical connector (5) to the Passlock(tm) control module (2). Slide the Passlock(tm) control module (2) in to the Passlock(tm) control module bracket (4). Push down on the Passlock(tm) control module (2) in order to engage the retaining tab (3) on the Passlock(tm) control module to the Passlock(tm) module bracket (4). Perform the Passlock(tm) learn procedure. See PASSLOCK(tm) SYSTEM  .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.