Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Component Testing
2004 Oldsmobile Bravada RWDSECTION Component Testing
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the harness connector at the right steering wheel control switch.
- Connect a DMM between terminals 3 and 4 of the right steering wheel control switch.
- If any of the resistance measurements for the individual switches are not within the specified resistance values, replace the right steering wheel control switch.
| Function Switch | Minimum Resistance Value | Maximum Resistance Value |
|---|---|---|
| Mute/Voice Recognition | 1.0k Ohms | 1.4k Ohms |
| Volume Down | 1.3k Ohms | 1.7k Ohms |
| Volume Up | 1.7k Ohms | 2.1k Ohms |
| Previous | 2.2k Ohms | 2.6k Ohms |
| Next | 2.8k Ohms | 3.2k Ohms |
| Source | 3.6k Ohms | 4.0k Ohms |
| Seek | 5.1k Ohms | 5.5k Ohms |
| No Switch Pressed | O.L. | O.L. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.