SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 197 (ENGINE CONTROLS - SERVICE & ADJUSTMENT SPECIFICATIONS - 2.2L)CAPACITIES
2004 Oldsmobile Bravada RWD

Section 197 (Engine Controls - Service & Adjustment Specifications - 2.2L): Capacities

2004 Oldsmobile Bravada RWDSECTION Capacities
WARNING: This page is about a different car, the 2003 GMC Sonoma and 2003 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
FLUID CAPACITY (CRANKCASE) (1)

Application (2) Quantity Qts. (L)
All Models 4.5 (4.3)
(1) Fluid capacities listed are approximate. Always fill to FULL mark.
(2) Includes oil filter capacity.
FLUID CAPACITY (COOLING SYSTEM) (1)

Application (2) Quantity Qts. (L)
Automatic Transmission 9.7 (9.2)
Manual Transmission 9.9 (9.4)
(1) Fluid capacities listed are approximate. Always fill to FULL mark.
(2) Includes heater.
FLUID CAPACITY (AUTOMATIC TRANSMISSION) (1)

Application (2) Quantity Qts. (L)
All Models 5.0 (4.7)
(1) Fluid capacities listed are approximate. Always fill to FULL mark with Dexron-III, unless specified otherwise.
(2) Drain and refill capacity only. Does not include torque converter, unless specified otherwise.
FLUID CAPACITY (MANUAL TRANSMISSION) (1)

Application Quantity Pts. (L)
All Models (2) 5.8 (2.7)
(1) Fluid capacities listed are approximate. Always fill to FULL mark.
(2) Synchromesh Transmission Fluid (GM 12377916).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.