Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1948 (FIXED AND MOVEABLE WINDOW SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Side Door Lock and Side Window Switch Screws - Front | 3 N.m | 27 lb in |
| Side Door Lock and Side Window Switch Screws - Rear | 3 N.m | 27 lb in |
| Side Door Window Belt Outer Sealing Strip Screws - Front | 1.5 N.m | 13 lb in |
| Side Door Window Belt Outer Sealing Strip Screws - Rear | 1.5 N.m | 13 lb in |
| Side Door Window Guide Bolts - Front | 10 N.m | 89 lb in |
| Side Door Window Guide Bolts - Rear | 10 N.m | 89 lb in |
| Side Door Window Regulator Motor Screws - Front | 8 N.m | 71 lb in |
| Side Door Window Regulator Motor Screws - Rear | 8 N.m | 71 lb in |
| Side Door Window Regulator Nuts - Front | 8 N.m | 71 lb in |
| Side Door Window Regulator Nuts - Rear | 8 N.m | 71 lb in |
| Side Door Window Weatherstrip Channel Retainer Bolts - Front | 10 N.m | 89 lb in |
| Side Door Window Weatherstrip Channel Retainer Bolts - Rear | 10 N.m | 89 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.