Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1920 (DRIVE AXLES - FRONT)
2004 Oldsmobile Bravada RWD
Section 1920 (Drive Axles - Front)
2004 Oldsmobile Bravada RWDSECTION Section 1920 (Drive Axles - Front)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 GMC Sierra, 2002 Chevrolet Tahoe, and 2002 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Component Locator
- Diagnostic Information And Procedures
- Repair Instructions
- Lubricant Level Inspection - Front Drive Axle
- Lubricant Replacement - Front Drive Axle
- Shield Replacement
- Electric Motor Actuator Replacement
- Vent Hose Replacement
- Vent Hose Connector Replacement - Front Drive Axle (Ratcheting Style)
- Vent Hose Connector Replacement - Front Drive Axle (Non-Ratcheting Style)
- Inner Shaft And/Or Housing Replacement - Front Drive Axle (8.25 S4WD And 9.25 Axles)
- Inner Shaft And/Or Housing Replacement - Front Drive Axle (8.25 F4WD Axle)
- Clutch Fork Replacement - Front Drive Axle
- Clutch Fork Inspection - Front Drive Axle
- Clutch Shaft Bearing Replacement - Front Drive Axle
- Inner Axle Seal And/Or Bearing Replacement - Front Drive Axle
- Inner Axle Shaft Shim Adjustment
- Differential Drive Pinion Flange/Yoke, Seal, And Dust Deflector Replacement - Front
- Differential Carrier Assembly Bushing Replacement
- Differential Carrier Assembly Replacement
- Bracket Replacement (15 Series)
- Bracket Replacement (25 Series)
- Differential Carrier Assembly - Disassemble (8.25 Inch Axles)
- Differential Case Assembly Disassemble (8.25 Inch Axle)
- Differential Case Assembly Disassemble (9.25 Inch Axle)
- Differential Case Bearings Inspection
- Differential Case And Gears Inspection
- Pinion And Ring Gear Inspection
- Thrust Washers, Shims, And Adjuster Sleeves Inspection
- Differential Case Assembly Assemble (8.25 Inch Axle)
- Differential Case Assembly Assemble (9.25 Inch Axle)
- Pinion Bearing Cup Installation (9.25 Inch Axle)
- Pinion Bearing Cup Installation (8.25 Inch Axle)
- Pinion Depth Adjustment
- Differential Carrier Assembly - Assemble
- Backlash Inspection And Adjustment
- Differential Carrier Assembly - Final Assembly (8.25 S4WD And 9.25 Axles)
- Differential Carrier Assembly - Final Assembly (8.25 F4WD Axle)
- Gear Tooth Contact Pattern Inspection
- Adjustments Affecting Tooth Contact
- Testing Procedure
- Correct Contact Pattern
- Drive Side Heel - Coast Side Toe Contact Pattern
- Drive Side Toe - Coast Side Heel Contact Pattern
- Drive Side Heel - Coast Side Heel Contact Pattern
- Drive Side Toe - Coast Side Toe Contact Pattern
- Description And Operation
- Special Tools And Equipment
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.