Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Setting Options
Select an option with the UP/DOWN ARROW keys. The selected option will be highlighted. Use the SIDE TO SIDE ARROW keys to activate or deactivate the highlighted options, an ASTERISK will be displayed when an option has been ACTIVATED. Use the SOFT keys to save the selected options or use the EXIT key to leave the options unchanged. After all options have been selected press the SOFT key to continue.
The following is a list of the selectable options:
- F0: Pre-alarm Option
- F1: CTD Operation
- F2: Door Lock Operation
- F3: Fob Feedback
- F4: Afterblow Option
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.