Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1891 (ENGINE COOLING SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Coolant Heater Bolt (LAT/L61) | 10 N.m | 89 lb in |
| Coolant Heater Bolt (L66) | 60 N.m | 44 lb ft |
| Condenser Radiator Fan Module (CRFM) Bracket Bolt | 8 N.m | 71 lb in |
| Crossover Pipe Bolts (L66) | 22 N.m | 16 lb ft |
| Engine Coolant Temperature (ECT) Sensor (LAT/L61) | 20 N.m | 15 lb ft |
| Engine Coolant Temperature (ECT) Sensor (L66) | 18 N.m | 13 lb ft |
| Exhaust Heat Shield Bolts (LAT/L61) | 22 N.m | 16 lb ft |
| Fan Assembly to Radiator Bolt | 8 N.m | 71 lb in |
| Fan Assembly Screw | 8 N.m | 71 lb in |
| Negative Battery Terminal Bolt | 17 N.m | 13 lb ft |
| Surge Tank Bolt | 8 N.m | 71 lb in |
| Thermostat Housing Bolt (L66) | 12 N.m | 106 lb in |
| Thermostat Housing Cover Bolt (LAT/L61) | 10 N.m | 89 lb in |
| Thermostat Housing Bolt (LAT/L61) | 10 N.m | 89 lb in |
| Thermostat Pipe Bracket-to-Cylinder Head Bolt (L61) | 8 N.m | 71 lb in |
| Transaxle Oil Cooler Line Fitting | 16 N.m | 12 lb ft |
| Water Pump Access Cover Bolt (LAT/L61) | 10 N.m | 89 lb in |
| Water Pump Bolt (LAT/L61) | 10 N.m | 89 lb in |
| Water Pump Bolt (L66) | 12 N.m | 106 lb in |
| Water Pump Sprocket Bolt (LAT/L61) | 10 N.m | 89 lb in |
| Wheel Nut | 125 N.m | 92 lb ft |
| Wiring Harness Ground Terminal Nut (L66) | 12 N.m | 106 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.