Installation Procedure

2004 Oldsmobile Bravada RWDSECTION Installation Procedure
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fan From The Motor
    GM1284991Courtesy of GENERAL MOTORS CORP.
  1. Install the fan (1) to the motor (2).
  2. Fig 2: View Of Cooling Fan Motor
    GM1284988Courtesy of GENERAL MOTORS CORP.
  3. Align the scribe marks (3) previously made on the fan (2) hub and the motor shaft (1).
  4. Fig 3: View Of Fan Retaining Clip From The Motor Shaft
    GM1284989Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.