Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fuse Block - I/P C2
2004 Oldsmobile Bravada RWDSECTION Fuse Block - I/P C2
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fuse Block - I/P C2 Connector Parts Information
Connector Part Information
|
Fuse Block - I/P C2 Connector Terminal Identification
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| A1-A2 | - | - | Not Used |
| A3 | GY | 8 | Instrument Panel Lamp Supply Voltage |
| GY | 8 | Instrument Panel Lamp Supply Voltage | |
| A4 | GY | 8 | Instrument Panel Lamp Supply Voltage |
| GY | 8 | Instrument Panel Lamp Supply Voltage | |
| A5 | GY | 8 | Instrument Panel Lamp Supply Voltage |
| GY | 8 | Instrument Panel Lamp Supply Voltage | |
| A6 | GY | 8 | Instrument Panel Lamp Supply Voltage |
| GY | 8 | Instrument Panel Lamp Supply Voltage | |
| B1-B6 | - | - | Not Used |
| C1 | - | - | Not Used |
| C2 | BN | 9 | Park Lamp Supply Voltage |
| BN | 9 | Park Lamp Supply Voltage (w/o T82) | |
| C3 | BN | 9 | Park Lamp Supply Voltage |
| C4 | OG | 1732 | Inadvertent Power Supply Voltage |
| C5 | BN/WH | 1571 | Traction Control Switch Signal (NW9) |
| C6 | L-BU | 195 | Door Lock Control |
| D1-D6 | - | - | Not Used |
Fuse Block - I/P C2 Connector Parts Information
Connector Part Information
|
Fuse Block - I/P C2 Connector Terminal Identification
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| A1-A2 | - | - | Not Used |
| A3 | GY | 8 | Instrument Panel Lamp Supply Voltage |
| GY | 8 | Instrument Panel Lamp Supply Voltage | |
| A4 | GY | 8 | Instrument Panel Lamp Supply Voltage |
| GY | 8 | Instrument Panel Lamp Supply Voltage | |
| A5 | GY | 8 | Instrument Panel Lamp Supply Voltage |
| GY | 8 | Instrument Panel Lamp Supply Voltage | |
| A6 | GY | 8 | Instrument Panel Lamp Supply Voltage |
| GY | 8 | Instrument Panel Lamp Supply Voltage | |
| B1-B6 | - | - | Not Used |
| C1 | - | - | Not Used |
| C2 | BN | 9 | Park Lamp Supply Voltage |
| BN | 9 | Park Lamp Supply Voltage (w/o T82) | |
| C3 | BN | 9 | Park Lamp Supply Voltage |
| C4 | OG | 1732 | Inadvertent Power Supply Voltage |
| C5 | BN/WH | 1571 | Traction Control Switch Signal (NW9) (Except HP7) |
| C6 | L-BU | 195 | Door Lock Control |
| D1-D6 | - | - | Not Used |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.