Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Auxiliary Fuse Block Label (HP7)
2004 Oldsmobile Bravada RWDSECTION Auxiliary Fuse Block Label (HP7)
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Auxiliary Fuse Block Label Usage (HP7)
| Device | Rating | Description |
|---|---|---|
| HILL HOLD Relay | - | Hill Hold Valve |
| TRANS PUMP Relay | - | Hybrid Pump Driver |
| STRTR Relay | - | Starter |
| PUMPS Fuse | 10 A | Heater Core Pump, Starter Generator Control Module (SGCM) |
| HILL HOLD Fuse | 20 A | Hill Hold Relay, Hill Hold Valve |
| TRANS PUMPS Fuse | 40 A | TRANS PUMP Relay, Hybrid Pump Driver |
| STRTR Fuse | 30 A | STRTR Relay, Starter |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.