Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1785 (REAR DRIVE AXLE)SPECIFICATIONSDIFFERENTIAL ADJUSTMENT SHIM SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Differential Adjustment Shim Specifications
2004 Oldsmobile Bravada RWDSECTION Differential Adjustment Shim Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
8.0, 8.6 Inch Axle Differential Adjustment Shims Specifications
| Number of Notches | Specification | ||
|---|---|---|---|
| Inside | Outside | Metric | English |
| 0 | 3 | 1.016 mm | 0.040" |
| 0 | 4 | 1.067 mm | 0.042" |
| 0 | 5 | 1.118 mm | 0.044" |
| 1 | 1 | 1.168 mm | 0.046" |
| 1 | 2 | 1.219 mm | 0.048" |
| 1 | 3 | 1.270 mm | 0.050" |
| 1 | 4 | 1.321 mm | 0.052" |
| 1 | 5 | 1.372 mm | 0.054" |
| 2 | 1 | 1.422 mm | 0.056" |
| 2 | 2 | 1.473 mm | 0.058" |
| 2 | 3 | 1.524 mm | 0.060" |
| 2 | 4 | 1.575 mm | 0.062" |
| 2 | 5 | 1.626 mm | 0.064" |
| 3 | 1 | 1.676 mm | 0.066" |
| 3 | 2 | 1.727 mm | 0.068" |
| 3 | 3 | 1.778 mm | 0.070" |
| 3 | 4 | 1.829 mm | 0.072" |
| 3 | 5 | 1.880 mm | 0.074" |
| 4 | 1 | 1.930 mm | 0.076" |
| 4 | 2 | 1.981 mm | 0.078" |
| 4 | 3 | 2.032 mm | 0.080" |
| 4 | 4 | 2.083 mm | 0.082" |
| 4 | 5 | 2.134 mm | 0.084" |
| 5 | 1 | 2.184 mm | 0.086" |
| 5 | 2 | 2.235 mm | 0.088" |
| 5 | 3 | 2.286 mm | 0.090" |
| 5 | 4 | 2.337 mm | 0.092" |
| 5 | 5 | 2.388 mm | 0.094" |
| 6 | 1 | 2.438 mm | 0.096" |
| 6 | 2 | 2.489 mm | 0.098" |
| 6 | 3 | 2.540 mm | 0.100" |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.