SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1745 (BODY FRONT END)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada RWD

Fastener Tightening Specifications

2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Air Inlet Grille Panel Bolts 4 N.m 35 lb in
Battery Tray Brace Bolts 10 N.m 89 lb in
Front Fender Bolts 10 N.m 89 lb in
Headlamp Housing Assembly Bolts 8 N.m 71 lb in
Hood Hinge to Body Bolts 25 N.m 18 lb ft
Hood Hinge to Hood Bolts 25 N.m 18 lb ft
Hood Latch Release Handle Nut 7 N.m 62 lb in
Hood Filler Close Out Panel 2 N.m 18 lb in
Primary Hood Latch Support Bracket Bolts 20 N.m 15 lb ft
Primary Hood Latch Bolts 10 N.m 89 lb in
Radiator Support Diagonal Brace Bolts 25 N.m 18 lb ft
Wheelhouse Panel Bolt 10 N.m 89 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.