Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1743 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM)REPAIR INSTRUCTIONSINFLATOR MODULE HANDLING AND SCRAPPINGDEPLOYMENT OUTSIDE VEHICLE - STEERING WHEEL MODULE, I/P MODULE, AND ROOF RAIL MODULE

2004 Oldsmobile Bravada RWD

Deployment Outside Vehicle - Steering Wheel Module, I/P Module, and Roof Rail Module

2004 Oldsmobile Bravada RWDSECTION Deployment Outside Vehicle - Steering Wheel Module, I/P Module, and Roof Rail Module

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Deploy the inflator module outside of the vehicle when the vehicle will be returned to service. Situations that require deployment outside of the vehicle include the following:

Using the SIR diagnostics, you determine that the inflator module is malfunctioning.
The inflator module is cosmetically damaged, scratched, or ripped.
The inflator module pigtail is damaged.
The inflator module connector is damaged.
The inflator module connector terminals are damaged.

Deployment and disposal of a malfunctioning inflator module is subject to any required retention period.

CAUTION: In order to prevent accidental deployment and the risk of personal injury, do not dispose of an undeployed inflator module as normal shop waste. Undeployed inflator modules contain substances that could cause severe illness or personal injury if their sealed containers are damaged during disposal. Use the following deployment procedures to safely dispose of an undeployed inflator module. Failure to observe the following disposal methods may be a violation of federal, state, or local laws.

Tools Required

J 39401-B SIR Deployment Fixture. See Special Tools .
J 38826 SIR Deployment Harness. See Special Tools .
An appropriate pigtail adapter

Turn OFF the ignition.
Remove the ignition key.
Put on safety glasses.
Remove the inflator module.
- If you are removing the steering wheel module, refer to Inflatable Restraint Steering Wheel Module Replacement .
- If you are removing the I/P module, refer to Inflatable Restraint Instrument Panel Module Replacement .
- If you are removing a roof rail module, refer to Inflatable Restraint Roof Rail Module Replacement - Front .

CAUTION: Refer to SIR Inflator Module Handling and Storage Caution in Cautions and Notices.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.