Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Scan Tool Output Controls
2004 Oldsmobile Bravada RWDSECTION Scan Tool Output Controls
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Miscellaneous Test | Rear Door Lock/Unlock | The BCM actuates the door lock relay when you select Lock. Rear doors should lock. The BCM actuates the door unlock relay when you select Unlock. Rear doors should unlock. |
| Miscellaneous Test | Left Rear Window | The BCM will control the left window up when you select Up. The BCM will control the left window down when you select Down. |
| Miscellaneous Test | Right Rear Window | The BCM will control the right window up when you select Up. The BCM will control the right window down when you select Down. |
Driver Door Module and Passenger Door Module
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Output Control | Window Up/Down | The DDM or PDM will command the window up and down |
| Output Control | Door Lock Unlock Test | The DDM or PDM will command the door lock actuator to lock or unlock |
| Output Control | Mirror Left/Right | The DDM or PDM will command the mirror left and right |
| Output Control | Mirror Up/Down | The DDM or PDM will command the mirror up and down |
| Output Control | Mirror Fold | The DDM or PDM will command the mirror to move in or out |
| Output Control | Mirror Heat | The DDM or PDM will command the mirror heater on and off |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.