Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1714 (ENGINE EXHAUST)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Compressor Bracket Bolt (L81) | 22 N.m | 16 lb ft |
| Coolant Extension Pipe (L81) | 20 N.m | 18 lb ft |
| Exhaust Heat Shield to Underbody | 10 N.m | 89 lb in |
| Exhaust Manifold Nuts (L61) | 18 N.m | 13 lb ft |
| Exhaust Manifold Nuts (L81) | 20 N.m | 15 lb ft |
| Exhaust Pipe to Intermediate Pipe Nuts | 30 N.m | 22 lb ft |
| Front Pipe to Manifold Nuts | 42 N.m | 31 lb ft |
| Front Pipe to Rear Pipe Nuts (L81) | 30 N.m | 22 lb ft |
| Fuel Tank Strap Bolt | 25 N.m | 19 lb ft |
| Manifold to Heat Shield Bolts | 23 N.m | 17 lb ft |
| Muffler Pipe Service Clamp | 45 N.m | 33 lb ft |
| Outlet Resonator/Duct Assembly to Support Bracket Bolts | 10 N.m | 89 lb in |
| Resonator Pipe to Flange Nuts | 30 N.m | 22 lb ft |
| Sensor - Oxygen-to-Exhaust Manifold | 45 N.m | 33 lb ft |
| Stabilizer Bar Link Nuts | 65 N.m | 48 lb ft |
| Stabilizer Bar to Frame Bolts | 50 N.m | 37 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.