Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Label - Service Parts ID
| Callout | Component Name |
|---|---|
| 1 | Vehicle Identification Number |
| 2 | Wheel Base |
| 3 | Part Number Location |
| 4 | Model Designation |
| 5 | Order Number |
| 6 | Exterior Color |
| 7 | Paint Technology |
The service parts identification label is placed on the vehicle in order to help the service and parts personnel identify the vehicle's original parts and the vehicle's original options.
| Callout | Component Name |
|---|---|
| 1 | Vehicle Identification Number |
| 2 | Wheel Base |
| 3 | Part Number Location |
| 4 | Model Designation |
| 5 | Order Number |
| 6 | Exterior Color |
| 7 | Paint Technology |
The service parts identification label is located on the Left hand rear door.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.