Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Glove Compartment Door Lock Cylinder Coding
2004 Oldsmobile Bravada RWDSECTION Glove Compartment Door Lock Cylinder Coding
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Select the correct lock tumblers for the desired code by the number stamped on the tumbler.
- Install lock tumblers (2), by applying downward pressure until locked into position.
- Check coding of lock cylinder (4). Insert key.
IMPORTANT:
When key is inserted into correct coded lock cylinder, all tumblers except the retainer is flush with the lock cylinder.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.