SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1679 (DOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada RWD

Fastener Tightening Specifications

2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Door Applique Screws - Front 2.2 N.m 20 lb in
Door Applique Screws - Rear 2.2 N.m 20 lb in
Door Check Link to Body Bolt - Front 10 N.m 89 lb in
Door Check Link to Body Bolt - Rear 10 N.m 89 lb in
Door Check Link to Door Frame Nuts - Front 10 N.m 89 lb in
Door Check Link to Door Frame Nuts - Rear 10 N.m 89 lb in
Door Handle Screw - Inside 2.5 N.m 22 lb in
Door Hinge to Door Bolts - Front 25 N.m 18 lb ft
Door Hinge to Door Bolts - Rear 25 N.m 18 lb ft
Door Hinge to Hinge Pillar Bolts - Front 25 N.m 18 lb ft
Door Hinge to Hinge Pillar Bolts - Rear 25 N.m 18 lb ft
Door Latch Bolts - Front 12 N.m 9 lb ft
Door Latch Bolts - Rear 12 N.m 9 lb ft
Door Outer Belt Retaining Screw - Front 2 N.m 18 lb in
Door Outer Belt Retaining Screw - Rear 2 N.m 18 lb in
Door Striker Bolts - Front 25 N.m 18 lb ft
Door Striker Bolts - Rear 25 N.m 18 lb ft
Door Trim Panel Screws - Front 2.5 N.m 22 lb in
Door Trim Panel Screws - Rear 2.5 N.m 22 lb in
Door Window Bolts - Rear 10 N.m 89 lb in
Door Window Regulator Bolts - Front 10 N.m 89 lb in
Door Window Regulator Bolts - Rear 10 N.m 89 lb in
Door Window Run Channel Bolts - Front 10 N.m 89 lb in
Door Window Run Channel Bolts - Rear 10 N.m 89 lb in
Outer Belt Seal Fasteners 2 N.m 18 lb in
Outer Door Panel Bolts - Front 8 N.m 71 lb in
Outer Door Panel Bolts - Rear 8 N.m 71 lb in
Outside Rear View Mirror Attachment Nuts 10 N.m 89 lb in
Power Mirror Switch Assembly Screw 2.5 N.m 22 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.