Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Scan Tool Output Controls
2004 Oldsmobile Bravada RWDSECTION Scan Tool Output Controls
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Door Lock Test | Driver Door Unlock | The BCM actuates the driver door unlock relay when you select ON. Driver door should unlock. |
| Door Lock Test | All Doors Lock | The BCM actuates the door lock relay when you select ON. All doors should lock. |
| Door Lock Test | Passenger Door Unlock | The BCM actuates the door unlock relay and the driver door unlock relay when you select ON. All doors should unlock. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.