Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1666 (POWER SEAT SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Actuator Motor Bracket to Seat Adjuster Nut | 10 N.m | 89 lb in |
| Adjuster to Floorpan Bolts | 24 N.m | 18 lb ft |
| Adjuster Track Cover Screws | 2 N.m | 18 lb in |
| Armrest Shoulder Bolts | 6 N.m | 53 lb in |
| Armrest Support Bracket Bolts | 3 N.m | 27 lb in |
| Armrest with Pass-Through Bolts | 5 N.m | 44 lb in |
| Child Seat Bolts | 6 N.m | 53 lb in |
| Child Seat Latch Bracket Bolt | 42 N.m | 31 lb ft |
| Child Seat Latch Bracket Nut | 42 N.m | 31 lb ft |
| Cross brace Bolts | 6 N.m | 53 lb in |
| Finish Panel Screws | 3 N.m | 27 lb in |
| Front Seat Retractor Side Belt Anchor Nut | 42 N.m | 31 lb ft |
| Inertia Seat Back Lock Bolts | 24 N.m | 18 lb ft |
| Pivot Bolts | 24 N.m | 18 lb ft |
| Power Seat Switch Screws | 3 N.m | 27 lb in |
| Rear Seat Back Anchor Nuts | 10 N.m | 89 lb in |
| Recliner to Seat Frame Pivot Bolts | 24 N.m | 18 lb ft |
| Vertical Actuator Screws | 6 N.m | 53 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.