SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1660 (BUMPERS)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada RWD

Fastener Tightening Specifications

2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Front Bumper Fascia to Fender Bolt 10 N.m 89 lb in
Front Bumper Fascia to Front Fender Liner Screws 2 N.m 18 lb in
Front Bumper Fascia to Upper Support Bolt 7 N.m 61 lb in
Front Bumper Impact Bar to Body Bolt 25 N.m 18 lb ft
License Plate Cover Screw 2 N.m 18 lb in
Grille Screws 2 N.m 18 lb in
Rear Bumper Impact Bar to Body Bolt 25 N.m 18 lb ft
Rear End Panel to Rear Bumper Fascia Nuts 5 N.m 44 lb in
Rear Quarter Panel to Rear Bumper Fascia Bolts 5 N.m 44 lb in
Upper Support to Center Radiator Support Bolt 7 N.m 61 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.