Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Installation Procedure
2004 Oldsmobile Bravada RWDSECTION Installation Procedure
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the inside air temperature sensor to the headliner.
- Connect the electrical connector to the inside air temperature sensor.
- Install the screws to the headliner.
- Install the left sunshade. Refer to SUNSHADE REPLACEMENT .
- Install the left center pillar garnish molding. Refer to GARNISH MOLDING REPLACEMENT-CENTER PILLAR .
- Install the left center assist handle. Refer to ASSIST HANDLE REPLACEMENT-REAR .
- Install the left windshield garnish molding. Refer to GARNISH MOLDING REPLACEMENT-WINDSHIELD PILLAR .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.