Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1484 (SEAT BELT SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specifications | |
|---|---|---|
| Metric | English | |
| Antenna Ground Bolt | 5.8 N.m | 51lb in |
| Buckle Side Nut | 50 N.m | 37 lb ft |
| Child Restraint Tether Anchor Plate Bolt | 27 N.m | 20 lb ft |
| Lower Retractor Bolt | 47 N.m | 35 lb in |
| Shoulder Harness Guide Bracket Bolt | 27 N.m | 20 lb ft |
| Upper Guide Bolt (Coupe, Hardtop) | 41 N.m | 31 lb ft |
| Upper Guide Nut (Convertible) | 40 N.m | 29 lb ft |
| Upper Lock Pillar Trim Screw | 1.8 N.m | 16 lb in |
| Upper Retractor Bolt | 41 N.m | 31 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.