SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1479 (STATIONARY WINDOW SYSTEM)COMPONENT LOCATORSTATIONARY WINDOWS CONNECTOR END VIEWS
2004 Oldsmobile Bravada RWD

Stationary Windows Connector End Views

2004 Oldsmobile Bravada RWDSECTION Stationary Windows Connector End Views
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Inside Rearview Mirror Terminal Identification - DDO

GM153632Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15393256
  • 7-Way F Metri-Pack 150 Series (BLK)
Pin Wire Color Circuit No. Function
1 BRN 341 Ignition 3 Voltage
2 BLK 150 Ground
3 LT GRN 24 Backup Lamp Supply Voltage
4 GRY 1690 Automatic Day/Night Mirror Signal
5 PNK 1691 Automatic Day/Night Mirror Low Reference
6 ORN 740 Battery Positive Voltage
7 ORN 640 Battery Positive Voltage
Inside Rearview Mirror Terminal Identification - W/O DDO

GM39660Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12047785
  • 4-Way F Metri-Pack 150 Series (BLK)
Pin Wire Color Circuit No. Function
A ORN 740 Battery Positive Voltage
B ORN 640 Battery Positive Voltage
C BLK 150 Ground
D BRN 341 Ignition 3 Voltage
Rear Defogger Grid Connector Terminal Identification (C1)

GM365953Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12092133
  • 1-Way F Metri-Pack 630 Series Self Lock (BLK)
Pin Wire Color Circuit No. Function
A BLK 293 Rear Defog Element Supply Voltage
Rear Defogger Grid Connector Terminal Identification (C2)

GM365953Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12092133
  • 1-Way F Metri-Pack 630 Series Self Lock (BLK)
Pin Wire Color Circuit No. Function
A BLK 350 Ground
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.