Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Label - Service Parts ID
| Callout | Component Name |
|---|---|
| 1 | Vehicle Identification Number |
| 2 | Engineering Model Number (Vehicle Division, Vehicle Line and Body Style) |
| 3 | Interior Trim and Decor Level |
| 4 | Exterior (Paint Color) WA Number |
| 5 | Paint Technology |
| 6 | Special Order Paint Colors and Numbers |
| 7 | Vehicle Option Content |
The service parts identification label is used to identify the original equipment options built into the specific vehicle being serviced. The option content of a vehicle is very important information to properly service the vehicle.
The service parts ID label (1) is located on the inside of the I/P passenger compartment door.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.