Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fastener Tightening Specifications
2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 Chevrolet TrailBlazer, and 2004 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specifications | |
|---|---|---|
| Metric | English | |
| Accelerator Pedal Position (APP) Sensor Bolt | 20 N.m | 15 lb ft |
| Air Cleaner Housing Nut | 12 N.m | 106 lb in |
| Air Cleaner Outlet Duct Bolt | 10 N.m | 89 lb in |
| Air Cleaner Outlet Duct Clamp | 7 N.m | 62 lb in |
| Camshaft Position (CMP) Sensor Bolt | 29 N.m | 21 lb ft |
| Crankshaft Position (CKP) Sensor Bolt | 25 N.m | 18 lb ft |
| Engine Coolant Temperature (ECT) Sensor | 20 N.m | 15 lb ft |
| Engine Wiring Harness Retaining Nut | 5.5 N.m | 49 lb in |
| EVAP Canister Purge Solenoid Bolt | 10.5 N.m | 93 lb in |
| Front End Diagonal Brace Bolt | 25 N.m | 18 lb ft |
| Fuel Fill Hose Clamp | 2.5 N.m | 22 lb in |
| Fuel Fill Pipe Bracket Nut | 10 N.m | 89 lb in |
| Fuel Fill Pipe Ground Strap Bolt | 10 N.m | 89 lb in |
| Fuel Filter Bracket Screw | 12 N.m | 106 lb in |
| Fuel Pipe Bracket Nut | 10 N.m | 89 lb in |
| Fuel Rail Bolt | 10 N.m | 89 lb in |
| Fuel Rail Crossover Pipe Retainer Clip Attaching Screw | 3.8 N.m | 34 lb in |
| Fuel Return Pipe Attaching Screw | 5 N.m | 44 lb in |
| Fuel Tank Shield Bolt | 25 N.m | 18 lb ft |
| Fuel Tank Strap Bolt | 32 N.m | 24 lb ft |
| Heated Oxygen Sensor (HO2S) | 42 N.m | 31 lb ft |
| Ignition Coil Bolt | 8 N.m | 71 lb in |
| Knock Sensor (KS) | 20 N.m | 15 lb ft |
| Mass Airflow/Intake Air Temperature (MAF/IAT) Sensor Clamp | 7 N.m | 62 lb in |
| Powertrain Control Module (PCM) Connector End Bolts | 8 N.m | 71 lb in |
| Spark Plug | ||
|
20 N.m | 15 lb ft |
|
15 N.m | 11 lb ft |
| Throttle Actuator Control (TAC) Module Bracket Nut | 9 N.m | 80 lb in |
| Throttle Body Bolt | 10 N.m | 89 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.