Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1393 (REAR DRIVE AXLE)COMPONENT LOCATORDIFFERENTIAL CARRIER ASSEMBLY DISASSEMBLED VIEWS
2004 Oldsmobile Bravada RWD
Differential Carrier Assembly Disassembled Views
2004 Oldsmobile Bravada RWDSECTION Differential Carrier Assembly Disassembled Views
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Dust Deflector |
| 2 | Coupling Housing Bolt |
| 3 | Coupling Housing |
| 4 | Coupling Front Bearing |
| 5 | Coupling |
| 6 | Coupling Rear Bearing |
| 7 | Washer |
| 8 | Shim |
| 9 | Side Gear Oil Seal |
| 10 | Inspection Plug |
| 11 | Vent Hose Elbow |
| 12 | Vent Hose |
| 13 | Vent Hose Elbow |
| 14 | Spring Clamp |
| 15 | Inspection Plug Gasket |
| 16 | Differential Carrier Vent |
| 17 | Differential Side Cover Bolt |
| 18 | Fill Plug Gasket |
| 19 | Side Gear Oil Seal |
| 20 | Fill Plug |
| 21 | Drain Plug |
| 22 | Drain Plug Gasket |
| 23 | Oil Baffle |
| 24 | Oil Baffle Bolt |
| 25 | Bearing Assembly |
| 26 | Drive Pinion Retaining Nut |
| 27 | Oil Seal |
| Callout | Component Name |
|---|---|
| 1 | Differential Carrier Housing |
| 2 | Side Bearing Shim |
| 3 | Side Bearing Assembly |
| 4 | Ring Gear |
| 5 | Differential Case |
| 6 | Ring Gear Retaining Bolt |
| 7 | Side Bearing Assembly |
| 8 | Side Bearing Shim |
| 9 | Differential Carrier Housing Cover |
| 10 | Side Gear Thrust Washer |
| 11 | Side Gear |
| 12 | Pinion Gear Thrust Washer |
| 13 | Pinion Gear |
| 14 | Pinion Shaft |
| 15 | Roll Pin |
| 16 | Oil Slinger |
| 17 | Collapsible Space |
| 18 | Drive Pinion Bearing Assembly |
| 19 | Washer |
| 20 | Drive Pinion |
| Callout | Component Name |
|---|---|
| 1 | Crossmember |
| 2 | Rear Differential Support Bracket Retaining Bolts |
| 3 | Rear Differential Support Bracket Retaining Bolts |
| 4 | Rear Differential Support Bracket |
| 5 | Differential Carrier Assembly |
| 6 | Lower Differential Support |
| 7 | Differential Carrier Retaining Bolts |
| 8 | Lower Differential Support Retaining Bolts |
| Callout | Component Name |
|---|---|
| 1 | Propeller Shaft Bolts |
| 2 | Coupling Cover Bolts |
| 3 | Washer |
| 4 | Oil Seal |
| 5 | Spacer |
| 6 | Coupling cover |
| 7 | Propeller Shaft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.