Driveline Disassembled Views

2004 Oldsmobile Bravada RWDSECTION Driveline Disassembled Views
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Driveline Disassembled View
GM814497Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Dust Cover
2 Intermediate Shaft
3 Rear Propeller Shaft
4 Cross Groove Joint Bolt
5 Cross Groove Joint Washer
6 Universal Joint Flange Retaining Nut
7 Center Support Bearing
8 Plate Washer
9 Universal Joint Flange
10 Plate Washer
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.