Installation Procedure

2004 Oldsmobile Bravada RWDSECTION Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Reading Lamp/Sunroof Switch Assembly
    GM245051Courtesy of GENERAL MOTORS CORP.
  1. Connect the courtesy and reading lamp/sunroof switch assembly electrical connector.
  2. Install the courtesy and reading lamp/sunroof switch assembly (1) to the roof. Secure the switch assembly with the screw.
  3. Fig 2: Sunroof Switch Assembly And Bezel
    GM244997Courtesy of GENERAL MOTORS CORP.
  4. Install the bezel (2) to the courtesy and reading lamp/sunroof switch assembly (1). Secure the bezel with the screw.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.