Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1369 (ANTILOCK BRAKE SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL OUTPUT CONTROLS
2004 Oldsmobile Bravada RWD
Scan Tool Output Controls
2004 Oldsmobile Bravada RWDSECTION Scan Tool Output Controls
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| ABS Warning Lamp | - | Commands the ABS indicator ON and OFF. |
| Left Front Hold Solenoid | - | Commands the solenoid ON and OFF. |
| Left Front Release Solenoid | - | Commands the solenoid ON and OFF. |
| Left Rear Hold Solenoid | - | Commands the solenoid ON and OFF. |
| Left Rear Release Solenoid | - | Commands the solenoid ON and OFF. |
| Pump Motor | - | Commands the pump motor ON and OFF. |
| Right Front Hold Solenoid | - | Commands the solenoid ON and OFF. |
| Right Front Release Solenoid | - | Commands the solenoid ON and OFF. |
| Right Rear Hold Solenoid | - | Commands the solenoid ON and OFF. |
| Right Rear Release Solenoid | - | Commands the solenoid ON and OFF. |
| Solenoid Valve Relay | - | Commands the solenoid ON and OFF. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.