Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Check Mode
The PCM has the ability to operate in the Normal mode or in the Check Mode.The 2 modes of operation are similar. When the PCM is operating in the Check mode, the PCM has an increased ability to detect malfunctions. The most significant feature of the Check mode operation is that all B type codes now run like A type codes. In order to request that the PCM operate in the Check Mode, scan tool communication with the PCM is necessary. For information on the use of the Check Mode in diagnosing driveability concerns, refer to Service Bay Test .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.