Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1357 (ACCESSORY POWER SOCKET)COMPONENT LOCATORPOWER OUTLET CONNECTOR END VIEWS
2004 Oldsmobile Bravada RWD
Power Outlet Connector End Views
2004 Oldsmobile Bravada RWDSECTION Power Outlet Connector End Views
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Accessory AC/DC Power Control Module Connector End Views
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | GN | Supply Voltage |
| 2 | - | Not Used |
| 3 | GN/BK | Power Receptical Supply Voltage |
| 4 | WH/BK | Ground |
| 5-6 | - | Not Used |
| 7 | GN/WH | Power Receptical Ground |
| 8 | - | Not Used |
Accessory Power Receptacle
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | GN/WH | Supply Voltage |
| 2-3 | - | Not Used |
| 4 | GN/BK | Ground |
Accessory Power Receptacle Switch Connector End Views
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | GN | Illumination Supply Voltage |
| 2 | WH/BK | Ground |
| 3 | RD/WH | Supply Voltage |
| 4 | WT/BK | Illumination Ground |
| 5 | - | Not Used |
| 6 | RD | Accessory Power Receptical Relay Supply Voltage |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.