Installation Procedure

2004 Oldsmobile Bravada RWDSECTION Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Floor Panel Carpet Components
    GM869076Courtesy of GENERAL MOTORS CORP.
  1. Install the floor panel carpet (6) to the vehicle.
  2. Reposition the carpet under the body side lower rear garnish moldings.
  3. Install the foot rest. Refer to Foot Rest Replacement  .
  4. Install the 4 plastic retainers (3) which secure the rear of the floor carpet (6).
  5. Fig 2: Removing/Installing Front Seat Belt
    GM240005Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.