Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1348 (ENTERTAINMENT SYSTEM)COMPONENT LOCATORENTERTAINMENT CONNECTOR END VIEWS
2004 Oldsmobile Bravada RWD
Entertainment Connector End Views
2004 Oldsmobile Bravada RWDSECTION Entertainment Connector End Views
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Amplifier Connector End View C1 (w/UZ6)
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| A1 | BK/WH | Sensitivity Control |
| A2 | - | Not Used |
| A3 | BK | Ignition Positive Voltage |
| A4 | BK | Left Rear Audio Input (+) |
| A5 | YE | Left Rear Audio Input (-) |
| A6 | PU | Left Front Audio Input (-) |
| A7 | PK | Left Front Audio Input (+) |
| A8 | WH | Mute Control |
| A9- A12 | - | Not Used |
| B1 | WH | Right Rear Door Speaker Output (-) |
| B2 | RD | Right Rear Door Speaker Output (+) |
| B3 | - | Not Used |
| B4 | WH | Right Rear Audio Input (-) |
| B5 | RD | Right Rear Audio Input (+) |
| B6 | LT GN | Right Front Audio Input (+) |
| B7 | BU | Right Front Audio Input (-) |
| B8 | - | Not Used |
| B9 | RD/WH | Left Front Door Tweeter Output (+) |
| B10 | BU/WH | Left Front Door Tweeter Output (-) |
| B11 | GN/WH | Right Front Door Tweeter Output (+) |
| B12 | BN | Right front Door Tweeter Output (-) |
Amplifier Connector End View C2 (w/UZ6)
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| A | LT GN | Right Front Door Speaker Output (+) |
| B | BU | Right front Door Speaker Output (-) |
| C | PU | Left Front Door Speaker Output (-) |
| D | PK | Left Front Door Speaker Output (+) |
| E | BU/RD | Battery Positive Voltage |
| F | WH/BK | Ground |
| G | BK | Left Rear Door Speaker Output (+) |
| H | YE | Left Rear Door Speaker Output (-) |
Digital Radio Receiver Connector End View
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | - | Not Used |
| 2 | BN/WH | Remote Radio Left Audio Signal |
| 3 | DK GN/WH | Remote Radio Right Audio Signal |
| 4-8 | - | Not Used |
| 9 | BK/WH | Ground |
| 10 | BK/WH | Audio Common |
| 11 | BARE | Drain Wire |
| 12-14 | - | Not Used |
| 15 | PU | Class 2 Serial Data |
| 16 | OR | Battery Positive Voltage |
Remote CD Changer Connector End View C1 (w/UW5)
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | WH | Left Audio Output |
| 2 | BK | Right Audio Output |
| 3 | RD | Signal Ground |
| 4 | Braided | Drain Wire |
Remote CD Changer Connector End View C2 (w/UW5)
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 5 | BU/WH | CD Changer Supply Voltage |
| 6 | - | Not Used |
| 7 | WH/BK | Ground |
| 8-9 | - | Not Used |
| 10 | BU | Control Signal |
Noise Filter Connector End View
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | BK/WH | Ignition Positive Voltage |
| 2 | - | Not Used |
Radio Connector End View C1 (w/UW4)
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| A1-A7 | - | Not Used |
| A8 | PK | Left Front Speaker Output (+) |
| A9 | PU | Left Front Speaker Output (-) |
| A10 | WH | Right Rear Speaker Output (-) |
| A11 | RD | Right Rear Speaker Output (+) |
| A12 | BN | Ground G201 |
| B1 | BU/YE | Battery Positive Voltage |
| B2 | GY | Ignition Positive Voltage |
| B3 | BK | Antenna Amplifier Supply Voltage |
| B4 | GN | LCD Backlighting Control |
| B5 | WH/GN | LCD Backlighting Dim ground |
| B6-B7 | - | Not Used |
| B8 | BK | Left Rear Speaker Output (+) |
| B9 | YE | Left Rear Speaker Output (-) |
| B10 | BU | Right Front Speaker Output (-) |
| B11 | LT GN | Right Front Speaker Output (+) |
| B12 | GN | Park Lamps Input |
Radio Connector End View C1 (w/UZ6 - Amplifier)
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| A1-A7 | - | Not Used |
| A8 | PU | Left Front Speaker Output (+) |
| A9 | PU | Left Front Speaker Output (-) |
| A10 | WH | Right Rear Speaker Output (-) |
| A11 | RD | Right Rear Speaker Output (+) |
| A12 | BN | Ground G201 |
| B1 | BU/YE | Battery Positive Voltage |
| B2 | GY | Ignition Positive Voltage |
| B3 | BK | Antenna Amplifier Supply Voltage |
| B4 | GN | LCD Backlighting Control |
| B5 | WH/GN | LCD Backlighting Dim ground |
| B6 | BK/WH | Sensitivity Control |
| B7 | - | Not Used |
| B8 | BK | Left Rear Speaker Output (+) |
| B9 | YE | Left Rear Speaker Output (-) |
| B10 | BU | Right Front Speaker Output (-) |
| B11 | LT GN | Right Front Speaker Output (+) |
| B12 | GN | Park Lamps Input |
Radio Connector End View C1 (w/UW5 - Navigation)
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| A1 | BU | Control Signal |
| A2-A7 | - | Not Used |
| A8 | PK | Left Front Speaker Output (+) |
| A9 | PU | Left Front Speaker Output (-) |
| A10 | WH | Right Rear Speaker Output (-) |
| A11 | RD | right Rear Speaker Output (+) |
| A12 | BN | Ground G201 |
| B1 | BU/WH | Battery Positive Voltage |
| B2 | GY | Ignition Positive Voltage |
| B3 | BK | Antenna Amplifier Supply Voltage |
| B4 | GN | LCD Backlighting Control |
| B5 | WH/BK | LCD Backlighting Dim ground |
| B6-B7 | - | Not Used |
| B8 | BK | Left Rear Speaker Output (+) |
| B9 | YE | Left Rear Speaker Output (-) |
| B10 | BU | Right Front Speaker Output (-) |
| B11 | LT GN | Right Front Speaker Output (+) |
| B12 | GN | Park Lamps Input |
Radio Connector End View C2 (w/UZ6 - Amplifier)
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| A-E | - | Not Used |
| F | WH | Mute Control |
| G-M | - | Not Used |
Radio Connector End View C2 (w/UW5 - Navigation)
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| A | - | Not Used |
| B | RD/BK | Backup/Reverse Signal |
| C | BARE | Drain Wire |
| D | - | Not Used |
| E | PU/WH | Vehicle Speed Signal |
| F-G | - | Not Used |
| H | BK | Right Audio Input |
| J | WH | Left Audio Input |
| K | RD | Signal Ground |
| L-M | - | Not Used |
LF Door Speaker Connector End View (w/UW4, UW5)
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | PK | Positive |
| 2 | PU | Negative |
LF Door Speaker Connector End View (w/UZ6)
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | RD | Positive |
| 2 | WH | Negative |
LF Door Tweeter Connector End View (w/UZ6)
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | PK | Positive |
| 2 | PU | Negative |
RF Door Speaker Connector End View (All)
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | LT GN | Positive |
| 2 | BU | Negative |
RF Door Tweeter Connector End View (w/UZ6)
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | LT GN | Positive |
| 2 | BU | Negative |
LR/RR Door Speaker Connector End View (All)
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | RD | Positive |
| 2 | WH | Negative |
Subwoofer Connector End View
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | BU | Subwoofer Positive |
| 2 | LT GN | Subwoofer Negative |
| 3 | BK | Subwoofer Positive |
| 4 | YE | Subwoofer Negative |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.