Engine Electrical Connector End Views

2004 Oldsmobile Bravada RWDSECTION Engine Electrical Connector End Views
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Clutch Pedal Position (CPP) Switch Connector End View

GM820095Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 90980-10825
  • WHT
Pin Wire Color Function
1 RED CPP Feed Circuit
2 BLK CPP Signal Circuit
Generator Connector End View

GM334998Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 90980-11349
  • BLK
Pin Wire Color Function
1 YEL Charge Indicator Load Signal
2 RED/WHT Ignition Positive Voltage
3 WHT Battery Positive Voltage
Park/Neutral Position (PNP) Switch Connector End View

GM820186Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 90980-11784
  • GRY
Pin Wire Color Function
1 - Not Used
2 RED/BLK Reverse Position Signal
3 RED/WHT PNP Switch Feed Circuit
4 LT GRN 2nd Gear Position Signalt
5 - Not Used
6 BLK Start Position Signal
7 BLU Drive Position Signal
8 LT GRN/BLK Low Position Signal
9 RED PNP Switch Feed Circuit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.