Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1340 (LIGHTING SYSTEMS)COMPONENT LOCATORLIGHTING SYSTEMS COMPONENT VIEWS
2004 Oldsmobile Bravada RWD
Lighting Systems Component Views
2004 Oldsmobile Bravada RWDSECTION Lighting Systems Component Views
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Ambient Light Sensor |
| 2 | Upper Instrument Panel |
| Callout | Component Name |
|---|---|
| 1 | Backup Lamp Switch |
| 2 | Park Neutral Position Switch |
| Callout | Component Name |
|---|---|
| 1 | Center High Mounted Stop Lamp (CHMSL) |
| 2 | Stop Lamps |
| Callout | Component Name |
|---|---|
| 1 | Cigar Lighter Rear Retainer |
| 2 | Cigar Element Housing |
| 3 | Cigar Element |
| Callout | Component Name |
|---|---|
| 1 | DRL Control Module |
| 2 | DRL Control Module Label |
| 3 | DRL Control Module Connector |
| Callout | Component Name |
|---|---|
| 1 | Front Dome Lamp |
| 2 | Rear Dome Lamp |
| Callout | Component Name |
|---|---|
| 1 | Flasher Relay |
| Callout | Component Name |
|---|---|
| 1 | Hazard Switch |
| Callout | Component Name |
|---|---|
| 1 | Instrument Panel Lamp Dimmer |
| Callout | Component Name |
|---|---|
| 1 | License Plate Lamps |
| 2 | Lift Gate |
| Callout | Component Name |
|---|---|
| 1 | Stop Lamp Switch |
| 2 | Stop Lamp Switch Lock Nut |
| 3 | Brake Pedal Bracket |
| Callout | Component Name |
|---|---|
| 1 | Turn Signal Headlamp Switch |
| 2 | Turn Signal Switch Retaining Tab |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.