Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1338 (CRUISE CONTROL SYSTEM)COMPONENT LOCATORCRUISE CONTROL CONNECTOR END VIEWS
2004 Oldsmobile Bravada RWD
Cruise Control Connector End Views
2004 Oldsmobile Bravada RWDSECTION Cruise Control Connector End Views
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Cruise Control Module Connector End View
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | - | Not Used |
| 2 | BK/WH | Cruise Control Module Feed Circuit |
| 3 | GN/WH | Brake Signal |
| 4 | BU | PNP Switch Signal |
| 5 | GN/RD | Cruise Indicator Control |
| 6 | BU | Cruise Interrupt Signal |
| 7 | RD/BU | Servo Control |
| 8 | GN/OR | Magnetic Clutch Control |
| 9 | - | Not Used |
| 10 | PK/BK | Serial Data |
| 11 | GN/YE | Cruise On-Off Signal |
| 12 | PU/WH | VSS Input |
| 13 | BU/WH | Idle Signal |
| 14 | RD/YE | Overdrive Signal |
| 15 | RD/GR | Servo Control |
| 16 | WH/BK | Ground |
Cruise Control Release Switch Connector End View
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | RD/WH | Cruise Control Release Switch Feed Circuit |
| 2 | BU | Cruise Control Release Switch Signal Circuit |
Cruise Control Servo Connector End View
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | RD/GN | Servo Control |
| 2 | RD/BU | Servo Control |
| 3 | RD/YE | Magnetic Clutch Control |
| 4 | WH/BK | Ground |
Cruise Control/Horn Switch Connector End View - C1
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | GN/YE | Horn Switch-Relay Control |
| 2 | GN/YE | Cruise On-Off Signal |
| 3 | WH/BK | Ground |
| 4-12 | - | Not Used |
Cruise Control/Horn Switch Connector End View - C2
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | WH | Horn Switch-Relay Control |
| 2 | RD | Cruise On-Off Signal |
| 3 | WH | Ground |
| 4-12 | - | Not Used |
Stop Lamp Switch Connector End View
| Connector Part Information |
|
|
|---|---|---|
| Pin | Wire Color | Function |
| 1 | GN/WH | Stop Lamp Switch Signal Circuit |
| 2 | RD/WH | Stop Lamp Switch Feed Circuit |
| 3 | GN/OR | Cruise Control Servo Interrupt Circuit |
| 4 | RD/YE | Cruise Control Module Interrupt Circuit |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.