Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1327 (BODY FRONT END)REPAIR INSTRUCTIONSHOOD REPLACEMENTINSTALLATION PROCEDURE

2004 Oldsmobile Bravada RWD

Installation Procedure

2004 Oldsmobile Bravada RWDSECTION Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Important: Before installing the hood, be sure to apply anti-corrosion treatment to the hood and hood hinge mating surfaces.

Install the hood (1) with the aid of a helper to the hood hinges (3), aligning the mating marks. Secure the hood with 2 mounting bolts at each hinge. Do not tighten fully.

Fig 1: Installing Hood To Hood Hinges
Courtesy of GENERAL MOTORS CORP.
Install the windshield washer nozzles (2) and supply hose (1) to the hood (3).

Fig 2: Installing Windshield Washer Nozzles & Supply Hose To Hood
Courtesy of GENERAL MOTORS CORP.
Reposition the hood insulator (1) and secure with the 2 plastic retainers (3).

Fig 3: Repositioning Hood Insulator & Securing With Plastic Retainers
Courtesy of GENERAL MOTORS CORP.
Remove the protective covers from the front fenders (2).
Adjust the hood if necessary. Refer to HOOD ADJUSTMENT .

Fig 4: Removing Protective Covers From Front Fenders
Courtesy of GENERAL MOTORS CORP.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.