Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Dash Mat Replacement - Side
The engine side dash mat is made of a flexible thermoplastic rubber. Pull away or remove the mat for the following service procedures:
- In order to service the mat.
- In order to make any repair behind the mat.
In many cases, you may pull the mat away in one area in order to make a repair behind the mat. If you need to cut the mat in order to perform a procedure, repair the cut with the following procedure:
- Lightly sand the surface surrounding the cut.
- Apply contact cement between the cut surface and the surrounding area.
- Allow the cement to cure before you stress the repaired area.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.